Winter is just around the corner. We are sure you are working hard to get your commercial operations ready for the upcoming Holiday season. While you are doing so, do not forget to look into rubber speed bumps for your parking spaces. Yes, seasonal changes need paying [more] attention to the rubber speed bumps on your commercial property and removing or installing them as required.
Rubber speed bumps are one of the most important features of your parking lot as they help slow vehicles and prevent accidents. As a result, it is essential to keep coming back to them and know when to remove or reinstall them.
Why and When to Remove Rubber Speed Bumps?
Removing portable speed bumps is not a novel concept. They are often removed to adjust the flow of traffic or when roads are resurfaced. Be that as it may, removing rubber speed bumps is all the more important when the winter weather draws near.
Even if you got hold of high-quality, weather-resistant rubber bumps that can endure a hard beating, removing them during the cold winter months will be a great idea. It will help prolong the life of the speed bumps. Not only will removing them extend the life of the bumps, but it will also boost safety for pedestrians, snowplow operators, and motorists. Rubber speed bumps become invisible during winters as they get draped with snow.
As a result, people driving by are oblivious of their presence and do not hit the brakes. Failure to slow down before approaching speed bumps dramatically raises the risk of an accident and vehicle damage. Second, the snow-covered bump may also pose a tripping hazard to pedestrians. This can be quite dangerous, especially for older folks.
By removing the rubber speed bump in the winters, you will be able to minimize the risk of falls and accidents.
How to Remove Rubber Speed Bumps?
If you are one of those who have absolutely no idea how to remove speed bumps, don’t worry! The process is straightforward—all you have to do is remove the asphalt spikes or lag bolts with which the speed bumps are secured to the surface. If they are fastened with asphalt spikes, use a wrecking bar to lift the spikes off the ground. If they are secured with lag bolts, you know what to do! Once removed, store them safely to be reused.
When to Reinstall Rubber Speed Bumps?
You can safely reinstall the rubber bumps in Spring when the winter is over, and snow is plowed. This will ensure the speed bumps are fit to prevent accidents and save lives once again. They will act as warning signs for drivers to lower their speed, drive safely, and let pedestrians cross the road.
Removing or reinstalling rubber speed bumps is a simple task. But it is of utmost importance. Therefore, make sure to pay attention to the speed bumps when the seasons are changing.
Address
Commonwealth Paving, 136 Outerloop, Louisville, Kentucky 40214
Phone: 502-459-7283, Fax: 502-456-2678
Opening Hours
| Monday | 8:00 a.m. – 5:00 p.m. |
| Tuesday | 8:00 a.m. – 5:00 p.m. |
| Wednesday | 8:00 a.m. – 5:00 p.m. |
| Thursday | 8:00 a.m. – 5:00 p.m. |
| Friday | 8:00 a.m. – 5:00 p.m. |
| Saturday | Closed |
| Sunday | Closed |
