Crack Sealing Tips: How to Fix Your Driveway Cracks?

These crack sealing tips are very useful. Do you know where to start when it comes to repairing driveway cracks at your home? Driveway cracks are often caused by aging cycles, a sinking sub-base, and/or freezing and thawing. If left unattended, cracks will allow moisture to penetrate and eventually erode the underlying sub-base beneath your asphalt driveway. The easiest way to prevent any pavement damage is to be proactive and take action before the cracks worsen.

Check out these crack sealing tips for the best results

What You’ll Need

Make sure you have the following tools on hand before you begin fixing driveway cracks at your home:

• Latex disposable gloves
• Push broom
• Steel handle tamper
• Chisel set
• Hammer
• Safety glasses
• Crack filler
• Asphalt patch
• Floor squeegee

Continue reading to find out what steps to take next in the driveway crack repair process.

Driveway Crack sealing Prep Work

Fixing driveway cracks keeps rainwater from seeping into and causing damage to your asphalt sub-base using crack sealing. As you learn how to repair driveway cracks, go over the following steps to properly prep the area:

• Wear protective eyewear to protect your eyes from debris.
• Make sure the crack is clear of any pieces of dirt or debris.
• Using a shop vacuum, air compressor, or garden hose, clean or flush out the crack.
• Before filling the crack, make sure that any standing water has dried off.

Fixing Driveway Cracks of Different Sizes

crack sealing: Whether you are dealing with tiny cracks or large ones, choose only the best products to repair driveway cracks at your home. High-quality crack fillers are not only designed to withstand any environmental or weather condition, but they are also capable of handling a project of any size.

Crack Filling a Small Asphalt Crack (1/8 to 1/2 Inch)

• Fill the crack with a cold pour crack filler.
• Pour it carefully from the container to apply it.
• Using a V- or U-shaped squeegee, smooth the crack filler level with the driveway surface.
• Allow the filler to dry completely before driving over the repaired area.

Filling a Large Asphalt Crack (>1/2 Inch)

• Fill the crack with some sand or very fine crushed gravel and pack it in.
• Fill the crack with a cold pour crack filler.
• Using a V- or U-shaped squeegee, smooth the crack filler level with the driveway surface.
• Allow the filler to dry completely before driving over the repaired area.

Fixing a Hole In Your Asphalt Driveway

Potholes can form as a result of neglected driveway cracks. Follow the instructions below to learn how to fill driveway potholes:

• Remove any loose material and large debris from the area.
• Pour asphalt patch repair material directly into the pothole, or smooth material an inch and half above pavement level with a flat-edge shovel or rake.
• Pack the material using a tamper or other suitable tool until it is compact. You could also cover the hole with plywood and drive over it to compact it.
• Fill deep potholes in 2-inch layers, then reapply and compact until the pothole is filled.

Finally, it would help if you considered crack sealing. Sealing driveway cracks prevents water seepage and protects your driveway from future cracks.

Address

Commonwealth Paving, 136 Outerloop, Louisville, Kentucky 40214
Phone: 502-459-7283, Fax: 502-456-2678

Opening Hours