If you are looking to repair or replace the asphalt pavement in your parking lot or other paved areas, there are two main options on the table: asphalt milling and replacement. While both of these methods can effectively get rid of your old, damaged pavement, the best option depends on the amount of damage as well as your budget and timeframe.

These two approaches to fixing your pavement are similar in some ways, but they vary in how they handle the asphalt and what they end up giving you once they are done. If you want to learn more about asphalt milling vs. replacement, read this article to get all the information you need!

What is it?

Asphalt milling is a process that involves grinding up an asphalt surface (usually a Know more about Asphalt Millingparking lot or road) to repair or replace it. The main difference between milling and a total replacement is that milling only removes the top layer of asphalt, while a replacement removes the entire pavement. This makes milling a more cost-effective and less disruptive option for repairing your pavement.

Here are some of the benefits of asphalt milling over a total replacement:

  • Cost: Asphalt milling is often cheaper than a complete replacement. In fact, it can be up to 50% cheaper than a total replacement.
  • Disruption: Milling causes far less disruption than a complete replacement, meaning you can keep your business open during the project.
  • Time: A milling project can be completed in a fraction of the time it would take to do a total replacement.
  • Mess: There is much less mess with asphalt milling, as there is no need to remove and dispose of the old pavement.
  • Structural integrity: Milling only removes the top layer of asphalt, which means the underlying pavement remains intact.
  • Environmentally friendly: Milling is a green option that recycles existing pavement instead of sending it to a landfill.

How does it work?

The working of the Asphalt MillingThe milling process is a simple one. Once you have chosen a milling contractor, they will dig out the top layer of asphalt from wherever your property needs repairs. They will then use heavy machinery to grind up this layer and return it into place on the damaged area. If any minor cracks are present in the underlying layers, they will also grind those down before putting new material back into place.

What to consider when deciding if asphalt milling is right for you?

Start by asking yourself how much traffic your pavement sees daily. If your answer is a lot, then you are probably better off with a total replacement. If, however, you only have a moderate amount of traffic, then asphalt milling may be a better option.

Here are a few other things to consider when making your decision:

  • Do you live in an area with extreme weather conditions?
  • Has your pavement been damaged by water or flooding?
  • Is your pavement uneven or showing signs of wear and tear?

If you answered yes to any of these questions, then asphalt milling is the better option.

When to consider replacing your whole lot?

Complete process of Asphalt MillingReplacing your parking lot is a big decision and a significant investment. You may be wondering if it is time to replace your whole pavement or if you can just get by with milling and resurfacing.

Here’s a breakdown of when you should replace your whole parking lot:

  • If your lot is more than 50 years old.
  • If you have an asphalt lot that is severely damaged with large cracks or potholes.
  • If you want to dramatically change the look of your lot.

Conclusion

It is your responsibility to maintain the pavement in your asphalt parking lot or other paved areas, but you are not sure if you should have it replaced or have it professionally milled instead. This decision can be tough to make on your own, but we hope this article helped you understand the differences between milling and replacement so that you can decide which one makes the most sense for your situation.

Address

Commonwealth Paving, 136 Outerloop, Louisville, Kentucky 40214
Phone: 502-459-7283, Fax: 502-456-2678

Opening Hours

Monday 9:00 AM – 5:00 PM
Tuesday 9:00 AM – 5:00 PM
Wednesday 9:00 AM – 5:00 PM
Thursday 9:00 AM – 5:00 PM
Friday 9:00 AM – 5:00 PM
Saturday Closed
Sunday Closed