Expert Asphalt Speed Bump Installation Contractors in Louisville, KY

Fast, Affordable Same-Day Service for Safer Roads, Parking Lots and Driveways Call (502) 459-7283 to get your free estimate on our commercial and residential asphalt and rubber speed bump installation services.

Service Introduction content

At Commonwealth Paving, we're Louisville's go-to experts for speed bump installation. We know our city's roads like the back of our hand, from the bustling streets of Downtown to the quiet neighborhoods of St. Matthews. Our team uses top-quality materials and time-tested techniques to install durable, effective speed bumps that keep our community safe. Whether you need to slow traffic in a busy parking lot or create a safer residential area, we've got the skills and local know-how to get the job done right. Trust your neighbors at Commonwealth Paving for speed bumps that stand up to Louisville's weather and heavy use.

Our Asphalt and Rubber Speed Bumps Services include

  • Custom Speed Bump Design
      • We design and install speed bumps to meet your specific needs and requirements.
  • Asphalt Speed Bumps
      • Durable and long-lasting speed bumps made from high-quality asphalt materials.
  • Rubber Speed Bumps
      • Flexible and impact-resistant speed bumps for various applications.
  • Speed Bump Removal
      • We can remove existing speed bumps if needed.
  • Speed Bump Maintenance
    • Regular inspections, maintenance and repairs to ensure optimal performance.
  • Parking Lot Speed Bumps
    • Enhance the safety of your parking lot with properly placed, high-visibility speed bumps to reduce vehicle speed and prevent accidents.

Benefits of Asphalt and Rubber Speed Bumps

  • Increased safety for pedestrians and drivers
  • Reduced vehicle speeds in high-traffic areas
  • Decreased risk of accidents and injuries
  • Enhanced property value and curb appeal
  • Durable solutions that withstand Louisville’s climate
  • Compliance with local traffic regulations

Get free quote

Extend the life of your driveway, parking lot, or road with Commonwealth Paving's professional asphalt speed bump installation services.

The Commonwealth Paving Asphalt and Rubber Speed Bumps Process

Assessment & Design

We evaluate your property to determine the best speed bump locations for optimal traffic control and safety.

Preparation

For asphalt speed bumps, we prepare the site by cleaning and leveling the surface for a smooth installation.

Installation

Our team quickly and efficiently installs asphalt or rubber speed bumps, ensuring a seamless and durable finish.

Finishing Touches

We apply high-visibility striping to ensure drivers can easily see the speed bumps, reducing the risk of accidents

Why Choose Commonwealth Paving - Louisville's Trusted Speed Bump Installation Company

At Commonwealth Paving, we’ve been providing asphalt and rubber speed bump installations to Louisville residents for over 36 years. As your local experts, we understand the specific needs of our community and always aim to deliver top-quality, reliable service.

review 1

100% customer satisfaction Guaranteed

We visit your property to evaluate the best parking bumper solution for your lot.

quick response

Quick Response - Often Same-Day Service

We visit your property to evaluate the best parking bumper solution for your lot.

certified

Full Service - Fully Certified, Licensed & Insured

We visit your property to evaluate the best parking bumper solution for your lot.

medal

Top-Quality Materials

We visit your property to evaluate the best parking bumper solution for your lot.

user experience

36 Years of Experience

We visit your property to evaluate the best parking bumper solution for your lot.

Transform your property with our expert paving solutions, whether it's a new driveway or a resurfaced parking lot. Count on us for quality work that suits your residential or commercial needs.

Our Projects

after 1 before
after 1 before
after 1 before

Here's what our satisfied customers are saying

Commonwealth Paving
4.3
Based on 18 reviews
powered by Google
James CotterJames Cotter
21:52 10 Aug 23
Over the years I have had my driveway resealed many times. This was the first time by Commonwealth Paving. It was by far the best resealing job I have ever had. The crew of five were outstanding. It was obvious they knew exactly what they were doing and did it very well. I will recommend this company without hesitation.
Stephanie DumkeStephanie Dumke
13:42 25 Apr 23
Best company to work with! Professional, detail orientated and efficient! Commonwealth Paving made my project easy!!!
paul ppaul p
23:17 26 Sep 22
New driveway is picture perfect. Everyone at Commonwealth were total pros. Both Mr. Rhodes and Maurice made sure the job was done in detail to perfection. Could not be any better, thank you!
Allison O'BryanAllison O'Bryan
17:07 16 Jun 22
I was very impressed with Commonwealth Paving We had a few delays in our driveway being re-pavement due to weather and staffing issues, however they were always sure to communicate about the delays which is appreciated. They would call and show up when they said they would. They explained everything about their process and did an excellent job. Would definitely recommend !
Norman PierceNorman Pierce
14:35 19 Dec 19
We really enjoy doing business with this company. We have a large sales center that over the years Commonwealth Paving has helped get paved with the best prices and quality work. They are very accommodating to your needs and don't hesitate to ask questions while on the job to make sure all needs are met. Their team is polite and efficient on the job and get done very quickly without leaving a mess to clean up after. Thank you all!!
js_loader

Trusted Asphalt Crack Sealing Services in Louisville, KY & Surrounding Areas

Services Areas

We're proud to serve

service area

Frequently Asked Questions

Asphalt speed bumps are permanent and ideal for heavy-traffic areas, while rubber speed bumps are quick to install, eco-friendly, and can be relocated.

Most installations can be completed within a few hours, depending on the size and scope of the project.

Costs vary depending on the materials and size of the project. Contact us at (502) 459-7283 for a personalised quote.

Asphalt speed bumps require minimal maintenance, while rubber speed bumps may need occasional repositioning or replacement if moved frequently.

rubber speed bumps louisville

How Asphalt Speed Bumps Calm Traffic And Keep Us All Safe

Asphalt speed bumps play a major role in controlling the flow of traffic. The bumps create drag and resistance to vehicles as they travel over them, which causes drivers to slow down. In addition, the raised surface of the bump creates an auditory warning to motorists, alerting them that they are approaching a hazard. As a result, drivers are more likely to obey the posted speed limit, making for a safer and more orderly streetscape.

While some drivers may view speed bumps as a nuisance, they are actually a key safety feature. By keeping traffic moving at a slower, more manageable pace, speed bumps help to prevent accidents and injuries. In densely populated areas, where pedestrians and cyclists are sharing the road with cars, trucks, and buses, this is especially important.

Types Of Speed Bumps

Asphalt speed bumps come in a variety of shapes and sizes. The most common type is the parabolic bump, which has a rounded top and bottom. This design allows vehicles to smoothly transition over the bump, minimizing jolts and jarring. Additionally, parabolic bumps are less likely to damage low-profile cars.

Another popular type of speed bump is the plateaued, or flat-top, design. This type of bump has a flat surface across its entire length. Plateaued bumps are often used in parking lots and driveways, as they can be easily driven over at slow speeds. However, they are not as effective at slowing down traffic as parabolic bumps.

There are also a few specialized types of speed bumps, such as the zebra crossing bump and the traffic-calming island. Zebra crossing bumps are raised, and striped crosses are placed in the middle of roads. They are designed to slow down traffic and improve pedestrian safety near crosswalks. Traffic-calming islands are large, raised medians that are placed in the middle of busy streets. These obstacles force drivers to slow down and navigate around them, which reduces traffic speed and volume.

Paved Speed Bumps Installation

Installing an asphalt speed bump is a pavement preservation measure that can help to maintain the longevity of your parking lot or private road. Asphalt speed bumps are also an effective traffic calming measure, as they force vehicles to slow down and navigate around the obstacle.

There are a few things to keep in mind when installing an asphalt speed bump:

  • The speed bump should be installed in an area where vehicles are already travelling at or below the posted speed limit.
  • The speed bump should be installed perpendicular to the flow of traffic.
  • The speed bump should be clearly marked with reflective signage or paint.
  • The speed bump should be installed in accordance with local ordinances.

Be sure to keep the above considerations in mind when installing your speed bump to ensure the safety of all drivers.

Process Of Installing An Asphalt Speed Bump

Installing a paved or asphalt speed bump is a relatively simple process. First, the area where the speed bump will be installed must be cleaned and free of debris. Next, the asphalt must be cut to create a trench for the speed bump. The trench should be wide enough to accommodate the width of the speed bump, plus two inches on each side.

Once the trench is cut, the speed bump can be installed. Speed bumps are typically made from recycled rubber or plastic and are filled with concrete. The speed bump is then placed in the trench and levelled off. Once the speed bump is in place, it should be covered with asphalt to protect it from weathering and wear.

The paved speed bump should be clearly marked with reflective signage or paint. The speed bump should be installed in accordance with local ordinances. Rubber speed bumps can be purchased at most hardware stores. Be sure to follow the manufacturer’s instructions for installation.

Speed Bumps Installation In Louisville, Kentucky

Asphalt Speed Bumps in Louisville, Kentucky are available in a variety of shapes and sizes to fit your specific needs. We offer parabolic, plateaued (flat-top), and zebra crossing bumps, as well as curbing services. Our team of experts can help you choose the right type of speed bump for your project.

We also provide the following paving services:

  • Asphalt Paving
  • Parking Lot Maintenance
  • Golf Course Paving
  • Bike Lanes
  • Driveway Paving
  • Residential Paving

We offer a wide range of services to meet the needs of our clients. Our team is dedicated to providing high-quality service and products to our clients. We pride ourselves on our customer service and satisfaction. If you are interested in learning more about our services, or if you would like a free quote, please contact us today. We look forward to serving you!

Constructing Asphalt Speed Bumps

Asphalt speed bumps are a great way to slow down traffic and keep everyone safe. But how are they made? Asphalt speed bumps are typically made from recycled rubber or plastic and filled with concrete. The rubber or plastic is then vulcanized, or cured, to create a strong bond between the materials.

The size and shape of an asphalt speed bump depend on the needs of the area where it will be installed. For example, a school zone might require a different size and shape than an industrial park. However, all asphalt speed bumps must meet certain standards set by the American Society for Testing and Materials (ASTM). Speed bumps in Louisville KY, as created by Commonwealth Paving conform to these standards.

What Are The Benefits Of Using Asphalt Over Other Materials For Speed Bumps?

There are several benefits to using asphalt for speed bumps.

  1. Asphalt is a durable material that can withstand heavy traffic and weathering.
  2. Asphalt is easy to repair if it becomes damaged.
  3. Asphalt speed bumps are less likely to damage vehicles than concrete or metal speed bumps.
  4. Asphalt is a recycled material, so it is an environmentally-friendly choice.
  5. Asphalt speed bumps are less expensive than concrete or metal alternatives.

When compared to rubber speed bumps, asphalt is a more durable and weather-resistant material. So, if you’re looking for a speed bump that will last, asphalt is the way to go.

Final Thoughts

Paved Speed Bumps are a great way to control traffic while ensuring the safety of drivers and pedestrians. If you are in need of a speed bump, be sure to contact a professional paving company like us. We would be happy to help you choose the right type of speed bump for your needs and install it according to the highest standards.

Paved Speed bumps

Speed bumps are raised sections of pavement that are designed to slow down traffic. They are usually made from asphalt or concrete and can be either temporary or permanent fixtures. Traffic calming devices like speed bumps are used to reduce traffic speed and make roads safer for pedestrians.

Speed bumps can be placed in parking lots, on residential streets, driveways, or anywhere else that there is a need to reduce traffic speeds. Paved speed bumps are usually about three to six inches tall and can be as long as 100 feet. Speed limit signs are usually posted nearby so that drivers know to slow down.

Types of speed bumps

Paved or asphalt speed bumps

Asphalt speed bumps are made from, you guessed it, asphalt. They are usually permanent fixtures, and can be either pre-formed or poured in place. Constructing Asphalt speed bumps is less expensive than concrete speed bumps, but they are also not as durable. Asphalt speed bumps can crack and crumble over time, especially if they are exposed to extreme weather conditions.

Rubber Speed Bumps

Rubber speed bumps are made from recycled tire rubber. They are usually permanent fixtures, and can be either pre-formed or poured in place. Rubber speed bumps are more expensive than asphalt speed bumps, but they are also more durable. Rubber speed bumps are less likely to crack and crumble over time, making them a good choice for areas that experience extreme weather conditions.

(1) Asphalt speed bumps

These are the most common type of bumps currently installed in the world. These bumps are the most common for various reasons. They are easy to customize; rubber and plastic bumps come in already fixed shapes and sizes and cannot be customized. However, asphalt road bumps can be tailored to fit specific road conditions. They are very durable and cost-effective because they are more resistant to damage than the other speed-bumps. They have an appropriate height that does not cause damage to the low vehicles as they cross the asphalt bumps.

However, there are also downsides to installing this type of bump. There is increased noise level, and vibrations as vehicles go over the bumps. There might be possible damages to car parts like the bumper because asphalt is strong, and if a driver does not see the bump early enough, they might hit their vehicles badly. During maintenance of such bumps, roads have to be closed, leading to a disruption in traffic patterns.

Commonwealth paving offers you all these services and expert advice on any inquiries you may have. At Commonwealth paving, quality is our priority.

(a) Installation

Asphalt speed bump installations are typically permanent. This means that once the speed bumps are installed, they are not meant to be removed. Asphalt speed bumps installation can be poured in place or pre-formed, while rubber speed bumps must be either poured in place or pre-formed.

Poured in place installations are usually more expensive than pre-formed installations. This is because they require special equipment and a lot of time to complete.

Pre-formed installations are less expensive than poured in place installations, but they are not always as durable. This is because the pre-formed speed bumps can crack or break if you do not install asphalt speed bumps correctly.

(b) Asphalt Speed Bumps

Asphalt speed bumps are made from, you guessed it, asphalt. They are usually permanent fixtures, and can be either pre-formed or poured in place. Constructing Asphalt speed bumps are less expensive than concrete speed bumps, but they are also not as durable. Asphalt speed bumps can crack and crumble over time, especially if they are exposed to extreme weather conditions.

(2) Rubber speed bumps

Bumps or speed breakers are installed on key parts of the road. These are very beneficial and advantageous because of various reasons. Rubber speed-bumps are cost-effective, one costing slightly above $100; this will not make you strain your finances, especially if you want to cater for a very long road. It is cheaper than metal, asphalt, and concrete speed-bumps. 

The installation process for rubber bumps is easy, with an average installation time of only 45 minutes. These bumps are also very flexible and can easily be modified or altered, especially in emergency cases. These rubber bumps are made from recycled tires and are therefore very eco-friendly. Unlike the others which use petroleum and other chemicals, this type of bumps is safe for the environment.

Rubber speed bumps can be installed on any road; therefore, it saves you money because you do not have to look for a different type or rubber model. After all, the roads are different. Since they have very reflective yellow stripes, they can easily be seen at night, which helps the drivers drive carefully on the roads. They also are light in weight compared to other speed bumps.

Speed bumps in Louisville KY

Speed Bumps in Louisville KY

Speed bumps are important in Louisville because they play a significant role in traffic calming and increasing the driver’s awareness on the road. Speed is the primary factor in most vehicular accidents and the faster one is driving increases the risk and severity of an accident. As vehicles move faster, they have less time to respond to road conditions and any resulting collision causes more damage.

It is said that speed bumps were associated with a 53% to 60% reduction in the odds of injury or death among children struck by an automobile in Louisville neighborhoods.

Get Your Estimate

What are speed bumps?

Speed bumps are, as the name suggests bumps that are placed on the road to help slow down vehicles and prevent accidents from occurring. A road with no bumps would see very many accidents in a day because there would be nothing to slow down vehicles that would end up colliding into each other. 

However, roads are not the only places that require speed bumps; parking lots are prone to pedestrian accidents hence the need for this in parking lots. Studies have shown that out of accidents that involve pedestrians being hit by vehicles, 22% of them occurred in parking lots. After installing they decreased by 46%, proving that this effectively promote safety in parking lots.

There are two types of speed bumps, rubber, and asphalt;

Perfect speed bumps for the Louisville customer

Rubber Speed bumps in Louisville

As a locally owned and bumper installation company operated, based in Louisville, KY we know how word travels fast in our community. That’s why when we go out to either a residential or a commercial job, we do everything we can to provide the best speed bumps contractor Louisville has ever seen. It doesn’t matter to us if we are doing a small driveway or a full parking lot for your facility – every single customer gets the same first class treatment. We want more than your money. We want to build a relationship with you for now and the future.

Looking for more information on speed bumps in Louisville? Contact us or get an estimate today.

Finding a speed bumps contractor in Louisville KY

asphalt speed bump

There are specific qualities to look for in speed bumps contractors. The first step is to do your research. In a climate such as we have in Kentucky, finding the right contractor for the Louisville area is vital for long-term success.

Avoid the temptation to rush; speed bumps installed under improper conditions are liable to have inferior performance characteristics.

Do you need speed bumps for your driveway, road, or parking? We can help. Get an Estimate today.

Rubber & asphalt bumps are usually found in parking lots, where they are utilized to keep speeds in the 10 to 15 mile-per-hour range. Rubber & asphalt bumps serve many purposes but are primarily used to reduce traffic speeds and volume on streets and parking lots. For more info from wiki click here

Rubber bumps offer all the advantages of traditional bumps without requiring maintenance or additional costs. They are most commonly used to calm traffic within residential roads, apartment and condominium complexes, and commercial parking lots. Rubber ones are an easy way to prevent speeding outside your property. They require less maintenance over time than an asphalt speed bump, and they are much more cost-effective.

Asphalt Speed Bumps Vs Rubber Speed Bumps: Which Is Right For You?

If you’re looking for a way to slow down traffic in your parking lot or on your street, you may be wondering if asphalt and rubber speed bumps are the right choices for you. Both have their pros and cons, and it can be tough to decide which is best for your needs.

In this article, we will explore the differences between asphalt speed bumps and rubber speed bumps, so that you can make an informed decision about which type of bump is right for you. But first, let’s take a look at what speed bumps are and how they work.

Speed Bumps

Speed bumps are raised sections of pavement that are designed to slow down traffic. They are usually made from asphalt or concrete and can be either temporary or permanent fixtures. Traffic calming devices like speed bumps are used to reduce traffic speed and make roads safer for pedestrians.

Speed bumps can be placed in parking lots, on residential streets, driveways, or anywhere else that there is a need to reduce traffic speeds. Paved speed bumps are usually about three to six inches tall and can be as long as 100 feet. Speed limit signs are usually posted nearby so that drivers know to slow down.

How Do They Work?

Speed bumps work by forcing vehicle drivers to slow down as they drive over them. The raised surface of the speed bump makes it difficult for vehicles to maintain their speed, and the bumps can also damage tires or cause other problems if drivers do not slow down.

Speed bumps are most effective when they are placed in areas where there is a lot of traffic, such as parking lots, drive ways or residential streets. Paving companies build speed bumps using either asphalt or concrete.

Asphalt Speed Bumps

Asphalt speed bumps are made from, you guessed it, asphalt. They are usually permanent fixtures, and can be either pre-formed or poured in place. Constructing Asphalt speed bumps are less expensive than concrete speed bumps, but they are also not as durable. Asphalt speed bumps can crack and crumble over time, especially if they are exposed to extreme weather conditions.

Rubber Speed Bumps

Rubber speed bumps are made from recycled tire rubber. They are usually permanent fixtures, and can be either pre-formed or poured in place. Rubber speed bumps are more expensive than asphalt speed bumps, but they are also more durable. Rubber speed bumps are less likely to crack and crumble over time, making them a good choice for areas that experience extreme weather conditions.

What Are The Similarities?

There are a few similarities between asphalt speed bumps and rubber speed bumps.

  • They are both permanent fixtures: This means that once you design and build speed bumps they are not meant to be removed.
  • They can both be pre-formed or poured in place: This means that the speed bumps can be bought already made, or they can be made on site.
  • They are both used to slow down traffic: Speed bumps are designed to force drivers to slow down as they drive over them.

What Are The Differences?

Now that we know what the similarities are, let’s take a look at the differences.

1.     Material

Asphalt is a cheaper material than rubber, so asphalt speed bumps are usually less expensive than rubber speed bumps. However, asphalt is not as durable as rubber and can crack and crumble over time.

Rubber is a more expensive material than asphalt, but it is also more durable. Rubber speed bumps are less likely to crack and crumble over time, making them a better choice for areas that experience extreme weather conditions.

2.     Dimensions

Asphalt speed bumps dimensions are usually about three to six inches tall and can be as long as 100 feet. Rubber speed bumps, on the other hand, are typically only two to four inches tall but can be up to 50 feet long.

This means that rubber speed bumps do not provide as much of a slowing effect as asphalt speed bumps. However, rubber speed bumps are less likely to damage tires or cause other problems if drivers do not slow down. Car tires can be damaged by speed bumps that are too tall or made from a material that is too hard.

3.     Weight

Asphalt speed bumps are typically much heavier than rubber speed bumps. This is because asphalt is a denser material than rubber. The weight of the speed bump can make it difficult to install and remove, so it is important to take this into consideration when deciding which type of speed bump to use.

Rubber speed bumps are usually lighter than asphalt speed bumps, making them easier to install and remove. However, because they are lighter, they may need to be anchored down with stakes or sandbags in order to stay in place.

4.     Installation

Asphalt speed bump installations are typically permanent. This means that once the speed bumps are installed, they are not meant to be removed. Asphalt speed bumps installation can be poured in place or pre-formed, while rubber speed bumps must be either poured in place or pre-formed.

Poured in place installations are usually more expensive than pre-formed installations. This is because they require special equipment and a lot of time to complete.

Pre-formed installations are less expensive than poured in place installations, but they are not always as durable. This is because the pre-formed speed bumps can crack or break if you do not install asphalt speed bumps correctly.

5.     Repairs

Asphalt speed bumps can be repaired with asphalt patching material. This is a quick and easy fix that can be done without having to remove the entire speed bump.

Rubber speed bumps can also be repaired, but the repair process is more difficult. Rubber patches can be used to repair small holes or cracks, but if the damage is extensive, the entire speed bump may need to be replaced. Installation or Repair of rubber speed bumps are more expensive than asphalt speed bumps.

What Is The Main Difference Between Paved Speed Bumps And Rubber Speed Bumps?

The main difference between the two types of speed bumps is the material they are made from. Paved speed bumps are made from asphalt, while rubber speed bumps are made from recycled tires. Both types of speed bumps have their pros and cons, so it’s important to choose the right one for your needs.

Rubber or plastic speed bumps will last longer and are more environmentally friendly, but they are also more expensive. Asphalt speed bumps are less expensive but don’t last as long and aren’t as eco-friendly. When it comes to deciding between asphalt speed bumps and rubber speed bumps, there are a few things you need to consider. The first is the material.

After reading this article, you should have a better understanding of the differences between asphalt and rubber speed bumps. You should also know the different speed bump installation methods, repair options, and cost considerations for each type of speed bump.

Conclusion

Both types of speed bumps installation in Louisville have their pros and cons, so it’s important to choose the right one for your needs. Asphalt speed bumps are less expensive but can be difficult to repair, while rubber speed bumps are more expensive but easier to repair. install, repair and replace all paved speed bumps with care to avoid damage to vehicles or injuries to drivers and pedestrians.

If you need help deciding which type of speed bump is right for you, contact your local paving company for more information. Commonwealth Paving – Speed hump installation services in Louisville, KY can help you choose the best type of speed bump for your needs and budget.