Is Asphalt Patching the Best Way to Repair Potholes?

Roads riddled with potholes impede a smooth riding experience. Potholes are depressions in the asphalt pavements. They are formed when water seeps underneath the pavement, freezes, and expands. Asphalt patching is the easiest way to address this issue.

But What Is Asphalt Patching?

Asphalt patching is the process of repairing asphalt pavements. It is one of the most effective (and economical) ways to tackle asphalt pavement problems like potholes. Patching helps repair the top two inches of the pavement by pouring fresh asphalt over the potholes.

Methods of Asphalt Patching

Potholes on the asphalt pavement can be repaired in two primary ways: using a cold patch or hot mix. Both ways effectively solve the issue and cover the potholes, making the pavement smoother. Let’s look at both of these in detail:

Cold mix patching

Usually, asphalt pavements are repaired using hot asphalt mixes. But cold patching is an easier option. It is ideal when you cannot wait for summers to kick to help set the hot asphalt mix. Because waiting will only worsen the condition of the pavement. A cold patch will be your quick fix to get your car moving down the pavement when you are in such a dilemma.

The cold mix is a pre-prepared mix you can buy from your nearest hardware store. It does not require a warm temperature to set. Therefore, it is a quicker solution to repair potholes in winters. Not only is cold patching quicker, but it is easier too, so much so that you can do it yourself. All you need to do is pour the cold mix into the potholes and pack it with a tamper.

This DIY option is both a lifesaver and a timesaver! There is one catch here, though—cold patching is a temporary solution. It is excellent if you want to fix the potholes right away. But when summers arrive, you will have to resort to a permanent method. What’s that? Read on.

Hot-mix patching

Hot mix is a more durable solution to repair potholes. It is a one-time investment that never lets potholes resurface. Hot mix asphalt patching is not a DIY project. You will need to hire a reputable asphalt contractor to get the job done right. But, the results will be lasting.

Here’s what takes place in a hot mix asphalt patching process:

The workers will first remove damaged asphalt around the pothole to create a bigger, smoother hole. Next, they will clean the pothole for long-lasting patching. They will then fill the pothole with the hot mix and tamp it down.

The process will be repeated until the pothole is overfilled with the mix. Finally, they will seal the patch to prevent water from penetrating and damaging the pavement again. These steps will ensure that potholes never resurface on your asphalt pavement.

Cold mix and hot mix are both efficient solutions for pothole repairs. Go for the cold mix asphalt patching to fix potholes in short order. Otherwise, invest in hot mix patching, and you will be good to go forever!

Address

Commonwealth Paving, 136 Outerloop, Louisville, Kentucky 40214
Phone: 502-459-7283, Fax: 502-456-2678

Opening Hours