If your driveway in Jeffersontown is cracked, sunken, or just past its prime, one of the first questions you’ll ask is how much a new one will cost. The honest answer is that it depends on size, condition, and what is under the surface. But you can get a realistic budget before you call anyone.
This guide breaks down typical asphalt driveway prices in the Jeffersontown and Louisville area, what changes the price, and how to compare quotes. If you want a number for your own property, our team offers driveway paving in Jeffersontown, KY with free written estimates.
Quick Answer: Driveway Paving Cost in Jeffersontown
For the Louisville area, a new asphalt driveway typically runs about $4 to $7 per square foot installed, depending on thickness and how much prep work is needed. Resurfacing an existing driveway with an overlay usually costs less, around $2 to $3 per square foot, but only works when the base underneath is still in good shape.
These are general market ranges, not a quote. Material prices, base conditions, and project size all move the final number, and many contractors have a minimum job charge for small driveways.
Typical Cost by Driveway Size
Here is what those per-square-foot ranges look like on common driveway sizes:
| Driveway type | Approx. size | Estimated cost range |
| Small one-car driveway | 12 ft x 30 ft (360 sq ft) | $1,500 to $2,500 (minimum charges may apply) |
| Standard two-car driveway | 24 ft x 24 ft (576 sq ft) | $2,300 to $4,000 |
| Larger two-car driveway | 24 ft x 40 ft (960 sq ft) | $3,800 to $6,700 |
| Long or wide driveway | 20 ft x 100 ft (2,000 sq ft) | $8,000 to $14,000 |
To estimate your own, multiply length by width in feet, then multiply by the per-square-foot range above.
What Affects the Cost of Paving a Driveway?
Two driveways of the same size can have very different prices. These are the factors that matter most.
1. Size and shape
More square footage means more material and labor. Curves, turnarounds, and wide aprons add time, and very small driveways cost more per square foot because crew and equipment setup costs are spread over less area.
2. Thickness of the asphalt
Most residential driveways are paved 2 to 3 inches thick over a compacted stone base. Thicker asphalt costs more but holds up better under heavier vehicles such as trucks, trailers, or RVs.
3. Base condition and preparation
This is the biggest hidden variable. If the stone base under your driveway is solid, the work is simpler. If it has settled, holds water, or has failed, it needs to be rebuilt, and that adds cost but also prevents the new surface from cracking early.
4. Removing the old driveway
If the current asphalt has to be torn out and hauled away, expect to add roughly $1 to $2 per square foot. A milling and overlay approach can sometimes avoid full removal.
5. Drainage and grading
A driveway that pools water or slopes toward the garage needs regrading. Good drainage is what makes asphalt last, so it is worth paying for.
6. Access and site conditions
Tight access, steep grades, tree roots, and obstacles like mailboxes, utilities, or fences can slow the crew and raise labor time.
7. Timing
Asphalt needs warm weather to be placed and compacted properly, so the paving season in Kentucky runs roughly from spring through early fall. Booking during the busiest months can affect scheduling and sometimes pricing.
Repair, Resurface, or Replace?
Not every worn driveway needs to be replaced. Here is how the options compare:
- Crack sealing and patching: best for driveways with a few cracks or small damaged areas and a solid base. This is the lowest-cost option. For an idea of repair pricing, see our driveway repair cost guide.
- Resurfacing (overlay): a new layer over the existing surface, usually around $2 to $3 per square foot. It works when the base is sound but the surface is worn.
- Full replacement: needed when there is widespread cracking (alligator cracking), deep potholes, sunken areas, or a failed base. It costs the most but resets the clock on the driveway’s lifespan.
A general rule: if more than about a third of the surface is damaged, or the damage keeps returning after repairs, replacement is usually the better long-term value.
How Long Does a New Asphalt Driveway Last?
A properly installed asphalt driveway typically lasts 15 to 25 years with maintenance. Kentucky’s freeze-thaw cycles are hard on pavement, because water gets into small cracks, freezes, expands, and breaks the surface. That is why maintenance matters.
Plan on sealcoating every few years once the new asphalt has cured, and seal cracks early before water can get in. Sealcoating is far cheaper than replacement, often well under a dollar per square foot, and it extends the life of the surface.
Tips to Get an Accurate Quote and Avoid Surprises
- Get written estimates that list thickness, base work, removal, drainage, and sealing.
- Compare the same scope. A lower quote may use thinner asphalt or skip base prep.
- Ask about the base. A good contractor explains what is under your driveway and what needs fixing.
- Verify license and insurance. Ask for proof before work starts.
- Check local reviews and past work. See what other homeowners say in our customer reviews.
- Ask about permits. If work touches the public right-of-way, such as a driveway apron or curb cut, confirm requirements with the City of Jeffersontown or Louisville Metro before work begins.
Frequently Asked Questions
How much does it cost to pave a driveway in Jeffersontown, KY?
Most new asphalt driveways in the Louisville area cost about $4 to $7 per square foot installed. A standard two-car driveway often falls between roughly $2,300 and $6,700, depending on size, thickness, and base condition.
Is it cheaper to resurface or replace my driveway?
Resurfacing is usually cheaper, around $2 to $3 per square foot, but it only works if the base is still sound. If the base has failed, resurfacing will not last and replacement is the better value.
How long does it take to pave a driveway?
Most residential driveways take one to two days to install, depending on size and prep work. The asphalt can usually be driven on after it has cooled and set, but your contractor will give you specific guidance.
When is the best time to pave a driveway in Kentucky?
Spring through early fall, when temperatures are warm enough for proper placement and compaction.
Do you offer free estimates in Jeffersontown?
Yes. Commonwealth Paving provides free written estimates for driveway paving in Jeffersontown and across the Louisville area.
Get an Accurate Driveway Paving Quote in Jeffersontown
The numbers above give you a starting point, but the only way to know what your driveway will cost is to have someone look at it. Commonwealth Paving has been paving Louisville-area driveways since 1988, and we offer free, no-pressure written estimates.
Request your free estimate or call us at 502-459-7283.
Own a business in Jeffersontown? We also handle parking lot paving and maintenance.
